Ring Resize Cost Calculator
What resizing should cost, and the metal added.
Estimate ring resizing cost from the sizes moved, the metal, band width and complexity, including the metal added or recovered.
Estimated cost
$94
2.00 sizes larger
These are inputs, not quotes: enter your own jeweller's fees. Sizing up costs more than down because metal has to be added, colour-matched and the whole band refinished.
How the Ring Resize Cost Calculator works
Resizing is priced on labour first and metal second, which is why sizing down is usually cheaper than sizing up even though it removes material. Going up means adding metal, matching it, and refinishing the whole band; going down means cutting a section out and closing the join. Both are jobs the calculator estimates rather than quotes.
Also known as: ring sizing cost calculator · ring resize price estimator
Labour first, metal second
Resizing is priced on bench time. Sizing down means cutting a section out, closing the join, and refinishing; sizing up means cutting, adding matched metal, joining, and refinishing a larger area. The metal itself is a minor part of the cost on anything but a very heavy band.
That is why sizing up usually costs more despite adding material: there is more work, and the added metal has to be colour-matched to the existing band, which is harder in white gold and rose than in yellow.
Platinum costs more again, because it needs higher temperatures, different solder and more finishing time. A platinum resize commonly runs half as much again as the same job in gold.
A worked example
A plain 18k yellow gold band going up two sizes, at a £45 base fee and £15 per size: £75 before multipliers. Yellow gold is the baseline, a plain band adds nothing, and sizing up adds around a quarter for the added metal and matching — roughly £94.
The same job in platinum with stones set round the shank would be several times that, if it can be done at all. The multipliers compound, which is why a quote for a complex ring bears little relation to the simple case.
Where the answer misleads
Some rings cannot be resized. An eternity band with stones all the way round has nowhere to cut, and the only route is remaking the shank — a different job at a different price. Tension settings and some titanium and tungsten rings cannot be resized at all.
Two sizes either way is the practical limit for a plain band before the proportions distort visibly: the shank thins going up and thickens going down, and the ring stops being round. Beyond that, remaking is usually better value than resizing.
Finally, resizing can damage a hallmark, which matters on antique and British pieces where the mark carries real value. Ask before the work starts, not after.
Frequently asked questions
How much does it cost to resize a ring?
Typically a modest bench fee for one or two sizes in a plain band, rising steeply with band width, metal and complexity. Platinum costs more than gold because it needs higher temperatures and different technique; eternity settings can be impossible.
Is sizing up more expensive than sizing down?
Usually, because it adds metal that has to be bought, colour-matched and seamlessly joined. Sizing down removes metal, which is sometimes credited back, though the labour is comparable.
How many sizes can a ring be resized?
Two either way is routine for a plain band. Beyond that the proportions distort, and a ring with stones set round the band may not be resizable at all without remaking the shank.
Will the resize show?
It should not on a plain band well finished. On a patterned or engraved band the join interrupts the pattern, and on a ring with a hallmark the resize can distort it, which matters on antique pieces.